Overview
With a consolidated design, TS burners can easily work with any gaseous or liquid fuel, with single or double fuel lances.
Designed with high air speed, TS burners provide a proper air and fuel mixing, allowing for full control over flame behaviour and furnace temperature distribution. They can be operated with both cold air and air preheated up to 650 °C.
Technical Data
Main technical features:
- Reduced NOx emissions
- Very low CO emissions (below 5 ppm)
- Maximum fuel efficiency: low excess air operations
- Air preheating up to 650 °C
- Equipped with pilot burner and UV sensor, if required
Fuels: Natural Gas, COG, Mixed Gas, Lean Mixed Gas, LPG, Heavy Fuel Oil and Light Fuel Oil (and hydrogen mixtures of them).
Turn down: 10%-100%.
Environment
220 mg/Nm3 @ 3% O2 for Natural Gas
320 mg/Nm3 @ 3% O2 for COG (*)
340 mg/Nm3 @ 3% O2 for Fuel Oil (*)
The emissions are referred to these operating conditions:
- Air excess 5% (G.N.), 7% (COG), 10% (Fuel Oil)
- Air temperature less than or equal to 450°C
- Furnace temperature less than or equal to 1250°C
- Burner load á 80%
The reported value is the expected one. The guaranteed value will be fixed case by case according to furnace type and working conditions.
(*) The emission values are subject to variation according to specific fuel analysis (fuel NOx).
Related Solutions
